Polymaker Industrial Polymide PA6-CF Black

Polymaker Industrial PolyMide PA6-CF Black

This product will not be restocked once sold out.

PolyMide is a family of filaments based on nylon / polyamide. Produced with Polymaker's Warp-Free technology, PolyMide filaments deliver technical properties inherent to nylon while being easy to print.

PolyMide PA6-CF is a carbon-fibre reinforced Nylon PA6 (Nylon 6) filament. The carbon fibre reinforcement provides significantly improved stiffness, strength, and heat resistance with excellent layer adhesion. The material exhibits outstanding thermal and mechanical properties without sacrificing layer bonding.

Please Note: This is an industrial filament that is not suitable for every printer and must be printed with a wear-resistant nozzle. Be sure to consult the specifications, technical data sheet, safety instructions, and printing guide before use.

Key Features:

• Superior Strength: Significant improvement in stiffness and tensile strength compared to standard Nylon.
• Warp-Free Technology: Advanced engineering allows for easier printing with the technical properties of industrial Nylon.
• High Thermal Stability: Excellent resistance to heat, making it suitable for functional industrial parts.

Specifications:

• Colour: Black
• Material: PolyMide PA6-CF
• Nozzle Temperature: 280 - 300°C
• Print Speed: 60 mm/s
• Bed Temperature: 25 - 50°C (Do NOT exceed 50°C)
• Cooling: OFF
• Young's Modulus: 7453 ± 656 MPa
• Tensile Strength: 105.0 ± 5.0 MPa
• Bending Strength: 169.0 ± 4.7 MPa
• Impact Strength: 13.34 ± 0.52 kJ/m²
• Melting Temperature: 220°C
• Drying Settings: 80°C for 12 hours
• Recommended Support: PolyDissolve S1
• Mandatory: Use of a wear-resistant (hardened) nozzle

Documentation:

Documentation:

• Technical details
• Safety instructions
• Printing guide
• PAHs
• Reach