Formlabs Form Studio Wash+Cure

Form Studio Wash+Cure is an all-in-one, compact, and affordable post-processing unit that handles both washing and curing for your resin 3D prints.

Washing mode: All resin 3D printed parts need washing to remove residual resin.

Form Studio Wash+Cure agitates IPA or alternative solvents around parts for thorough, efficient cleaning.

When washing is done, simply raise the internal basket out of the solvent to let parts air dry and avoid over-soaking, warped prints.

Curing mode: Using 405 nm light, Form Studio Wash+Cure completes the chemical reaction started

during printing. Post-curing boosts part strength, toughness, heat resistance, and creep resistance,

while leaving a harder, less tacky surface.

Form Studio Wash+Cure is compatible with IPA, TPM, and Resin Washing Solution.

Form Studio Wash+Cure's washing mode does not automatically raise parts from the solvent. To have parts removed from the solvent without intervention, choose Form Wash.

Form Studio Wash+Cure's curing mode does not heat parts. To fully cure materials that require heat, choose Form Cure.