HeyGears UltraCraft Reflex & Reflex Turbo Pulsing Release Module Kit

Designed for high-speed performance, the UltraCraft Reflex & Reflex Turbo Pulsing Release Module Kit combines a specialised Pulsing Release Module with a matching Reflex Pulsing Release Resin Tank.

Reflex Pulsing Release Module

The HeyGears Reflex Pulsing Release Module is an optional upgrade engineered to elevate the speed, reliability, and material capabilities of your HeyGears UltraCraft Reflex desktop 3D printer. By integrating dynamic pressure control during the printing cycle, the module actively inflates and deflates the tank release film, cutting layer peel forces in half to deliver faster, higher-yield print jobs with significantly reduced support requirements.

Key features

• ~50% reduction in peel force: active pressure regulation minimises pull tension on delicate geometries, preventing part distortion, layer shifting, and print detachment.
• Faster print cycles: decreased suction stress enables faster Z-axis movements, boosting total print speeds by up to 20%*.
• Optimised support efficiency: lowers peel stress enough to reduce required support structures by up to 25%*, saving material and shortening post-processing cleaning time.
• Unlocks advanced engineering materials: enables reliable printing with specialised high-viscosity resins such as PAC10, PAE10, and PAU20.

*Data based on PAU10 resin.

The Pulsing Release Module is not recommended for prints with walls that are thinner than 3 mm. Printing performance may vary depending on materials and model design.

Reflex Pulsing Release Resin Tank

The HeyGears Reflex Pulsing Release Resin Tank is a high-performance tank for UltraCraft Reflex 3D printers. Built with a low-suction dynamic film and leak-proof housing, it reduces layer separation forces to protect delicate model geometries.

HeyGears UltraCraft PrintBoost System Reflex includes

• Pulsing Release Module x1
• Pulsing Release Resin Tank x1

Printer & system compatibility

This add-on is designed specifically for the original HeyGears UltraCraft Reflex 3D printer. 

Note:this add-on is mandatory for 3D printing with PAC10, PAE10, and PAU20 resins; it is not compatible with water-washable resins (PAWW10/PAWW20).

This product consists of:

Pulsing release module host: EAN 6971437941850
Reflex Pulsing Release Resin Tank: EAN 6971437942055