Ultimaker Adhesion Sheets: the foundation for high-quality prints
Ultimaker Adhesion Sheets provide a high-performance alternative to glue sticks, ensuring your 3D prints adhere perfectly to the glass build plate. They are particularly effective for materials prone to warping or requiring a smoother, flatter first layer. Each pack contains 25 sheets and a dedicated applicator for a professional, bubble-free finish.
By providing a consistent surface texture, these sheets guarantee high-quality results and reduce the risk of print failures, especially during long or complex print jobs.
Key benefits:
- Enhanced adhesion: Superior first-layer grip for technical materials such as PP, PC, and CPE+.
- Bubble-free application: The included applicator and wet-application method ensure a perfectly flat printing surface.
- Consistent results: Provides a more uniform surface than manually applied glue, giving a professional finish on the base of your parts.
- Reduced warping: Maintains dimensional accuracy by preventing corners from lifting during the cooling process.
Application guide:
- Preparation: Remove the glass plate from the printer and moisten it with a small amount of water mixed with a drop of dish soap. Ensure the yellow warning sticker is facing upwards.
- Apply: Peel the adhesion sheet from its backing and place it carefully onto the centre of the wet glass plate.
- Smoothing: Use the included applicator to sweep away water and air bubbles, starting from the centre and moving outwards. If small bubbles remain, carefully prick them with a fine needle to flatten the surface.
- Evaporation: Reinstall the plate in the printer and heat the build plate to 100°C for a few minutes to remove remaining moisture before printing.
Compatibility:
Adhesion sheets are available in two sizes to suit your specific Ultimaker model:
- Standard (2197): Compatible with Ultimaker S3, 3 series, 2+ Connect, and 2 series.
- Large (210702): Designed for the Ultimaker S5 and S7 glass plate variant.
